FF-spare-belt-Service

We will also be happy to supply you with suitable conveyor belts!

Matching types, exact prepared ends for folding unit or post press machines.

Test us!  Ask us without obligation!

Newsflash

Important information because of the pandemic

We are doing our utmost to carry out our work with the usual quality and reliability.
The health and protection of our colleagues during their work and stay must be guaranteed. The generally applicable standards, such as distance, hygiene and relevant health regulations must be met.

Read more ...

FF Service

FF Service GmbH
FF Service - your partner


For more than 20 years FF Service GmbH has been a trustworthy partner for many customers all over the world.
We are a service provider for printing plants with rotary offset printing machines. Our task is to maintain and optimize the folding units and machines of the post-processing. Our main focus is the exchange of belts and wear parts. Our speciality is the replacement of belts in the folders. We have many years of experience with folding units from manroland, Goss, KBA, Komori and Heidelberger, but we are also very familiar with postpress machines.

FF Service - Because it's better!

Lithoman

Your Folding unit

Downtime and the drop out of a machine is expensive!
Our main focus is on predictive maintenance.  Possible downtime or even failure is thus avoided. We service your machine before it fails to ensure smooth and downtime-free work. We pay particular attention to long running times and long service lives.

After each service on your machine you will receive a service report with the performance, the work carried out on your machine and recommendations for future services.

maintenance

before it's getting worse

Maintenance

Standstill is expensive! The failure of a machine does not only cost time and money, it can even endanger an order! We take care of your machines before it is too late and damage occurs. Preventive maintenance is what we do. 

Downtime must be avoided

belts in a stacker

All that comes afterwards

Stacker

Our work does not stop at the folder of your machine
We also take care of the tapes in your post-processing, such as stitching, log forming, stacking or crosslapping.

Here, too, the motto is: long running times and good, reliable performance. Replace what is necessary and act with foresight.

We have some post-processing machines of some manufacturers in our portfolio:

  • RIMA System
  • IN-Log
  • Müller Martini
  • Gämmerler
  • Segbert

Please ask us for a non-binding offer.

In our work we only use original spare parts and tapes from well known manufacturers.

We carry transport and conveyor belts from leading manufacturers. From these we determine the ideal conveyor belt portfolio for you. We assemble in our own workshop with a large selection of different belt types and widths. We can therefore manufacture and dispatch or install on a daily basis.

Always the right end connection to match the belt type - optimised finger- and wedge connections.

Of course we also supply spare belts for your machine. We also supply you with specially manufactured spare belt sets, which we deliver to you individually packed, dust-tight and packaged.

We are also happy to supply you with tools and aids from the manufacturers listed below.

 

Our suppliers for belts

habasit logoHabasit GmbH 
Babenhäuser Str. 31
D-64859 Eppertshausen
http:/www.habasit.de/

 


ammeraalbeltech logoAmmeraal Beltech GmbH 
Hermsdorfer Str. 3
D-21502 Geesthacht
http://www.ammeraalbeltech.de/

 


chiorino logoChiorino GmbH
Nikolaus-Kopernikus-Str. 9
D-55129 Mainz
http://www.chiorino.de/

 

forbo logoForbo Siegling GmbH
Lilienthalstraße 6/8
D-30179 Hannover
http://www.forbo-siegling.com/

 

 

Our supplier for wear parts

 

manroland goss logomanroland Goss web systems GmbH
Alois Senefelder Allee 1
D-86153 Augsburg
http://www.manrolandgoss.com/

 

Forbo Belts

Belts of the world

We have tapes of many well-known tape manufacturers in our program. Because here, too, we are exclusively concerned with quality - we only use tapes from the renowned top manufacturers.

From the tape material we assemble your individual tape set according to your specifications, in the perfect length. In each case with wedge connections or finger connections, always suitable for the respective band type.

Only original is original.

Therefore, we only use the high quality and original consumable parts and spare parts from the manufacturers. Due to our good business connections to the manufacturers, we can offer you the parts at the best prices.

This means for you: reliability and quality at the highest level. An extensive warranty and uncomplicated support are of course included in our services to you.

Lithoman

Optimal service

We change the consumable parts and spare parts to suit your requirements. In accordance with the down time of the machine and the need for urgency; we change the pulleys and bearings either completely or section by section.

Our approach: We recommend, You decide.

Wide product range
We offer a wide range of products. This includes consumable parts and spare parts that are not available in official stores and catalogues of the manufacturers.

A small selection of our product range:

  • Pulleys
  • Tape Rolls
  • Folding rollers
  • Angular contact, deep groove and self alligning ballbearings
  • Axis
  • Folding jaws
  • Folding blades
  • Funnel nose
  • Camshaft
  • Roller tube
  • Plastic webbing triangle
  • All kinds of springs, brackets, rings and pins

And many more. It is our pleasure to be of service to you regarding your consumable parts and spare parts.
Just get in contact with us.